This article reflects federal rules as of June 2026 and covers tax year 2025. It also notes state nuances where they matter. Tax law changes โ confirm current figures before you file. This guide is educational and is not a substitute for advice from a licensed CPA, tax attorney, or appraiser for your specific situation.
Quick Answer
Split the cost basis using the fair market value of each part. For tax year 2025, the IRS says you multiply your total cost by the building’s share of value. If you don’t know fair market values, you may use the property’s assessed values from your county tax bill. Land is never depreciated; the building is.
When you buy a property that has both land and a building, you pay one price for the whole thing. But the tax law treats those two pieces very differently. You can depreciate the building over time and write off part of its cost each year, yet you can never depreciate the land underneath it. So you must divide your single purchase price into two numbers, and the way you split it directly changes how big your yearly tax deduction is.
This split is not a guess you make once and forget. It sets your depreciation for decades, it follows you when you sell, and it can trigger an IRS adjustment if it looks unrealistic. According to the IRS’s own basis guidance in Publication 551, you allocate the lump sum between land and building “so you can figure the depreciation allowable on the buildings” โ and getting it wrong is one of the most common errors on rental returns.
- ๐ How to divide one purchase price into land and building the way the IRS expects.
- ๐งฎ Four allocation methods โ contract, assessor ratio, appraisal, and replacement cost โ with real math you can copy.
- ๐ Why putting too much value on land quietly steals thousands in depreciation deductions.
- โ๏ธ How the IRS and the Tax Court challenge aggressive splits, and how to defend yours.
- ๐ The exact next steps, forms, and records you need before you file.
Why You Even Have to Split the Basis
Cost basis is the dollar amount you have invested in a property for tax purposes. The basis of property you buy is usually its cost, which includes the price plus many closing costs, as the IRS explains under cost basis rules. That single number is your starting point for everything: depreciation, gain or loss when you sell, and casualty losses.
The reason you must break that number apart comes from depreciation law. Under Internal Revenue Code section 167 and the modern depreciation system in section 168, you may deduct part of the cost of property that wears out, gets used up, or becomes obsolete. A building wears out. Land does not. Land lasts forever in the eyes of the tax code, so it has no “useful life” to spread a deduction over.
Here is the plain-English rule and its consequence. You cannot depreciate land because the law allows depreciation only on property that decays, and the consequence is that every dollar you assign to land is a dollar you can never deduct through depreciation. A common misconception is that depreciation is optional or that you can skip the split if you “don’t plan to claim much.” That is false and dangerous. When you sell, the IRS reduces your basis by the depreciation you took or could have taken, as stated in the decreases-to-basis section of Publication 551. So if you never split the basis and never depreciate, you can still owe tax as if you had โ the worst of both worlds.
What you should do about it: split the basis before you place the property in service, and start depreciation on the building portion in year one using Form 4562. Residential rental buildings depreciate over 27.5 years; commercial buildings over 39 years, both under the rules in IRS Publication 946.
The Core IRS Rule, Stated Simply
The controlling instruction is short. In the “Land and Buildings” section of Publication 551, the IRS says to figure the basis of each asset by multiplying the lump sum by a fraction: the numerator is the fair market value (FMV) of that asset, and the denominator is the FMV of the whole property at purchase. In plain words, the building gets the same percentage of your cost as it represents of the property’s total value.
Fair market value means the price a willing buyer and willing seller would agree on, neither being forced to act. That is the gold standard. But the IRS knows most buyers don’t have a clean FMV breakdown sitting in a drawer, so it gives a fallback in the same passage: “If you’re not certain of the FMV of the land and buildings, you can allocate the basis based on their assessed values for real estate tax purposes.”
The consequence of ignoring this rule is real money. If you allocate arbitrarily, the IRS can recompute your depreciation, disallow part of it, and add penalties and interest. A frequent misconception is that the purchase contract price is your land-building split. It is not โ the contract usually gives one combined number, and you must do the allocation yourself with a defensible method. What you should do: pick one of the four methods below, document it, and keep the proof with your tax records for as long as you own the property plus at least three years after you sell.
Which Method Applies to You?
The best method depends on what evidence you have. Use this quick branch to find your path, then read the matching section below.
- If your purchase contract or closing statement lists separate land and building values, start with the contract method โ but only if the numbers look reasonable.
- If you have no contract split but you do get a county property tax bill (almost everyone does), use the assessor-ratio method. This is the most common approach for rental owners.
- If the assessor’s numbers look wrong or unfairly high on land, or a lot of money is at stake, pay for a qualified appraisal.
- If you want a second cross-check, use insurance replacement cost for the building and comparable vacant-land sales for the land.
The four methods can even disagree with each other. That is normal. The goal is not a single “correct” number but a reasonable, supportable one you can explain if asked.
Method 1 โ Use the Purchase Contract or Closing Documents
Sometimes the seller and buyer agree in writing on how much of the price is land and how much is building. The IRS generally respects this. As Publication 551 notes, if the allocation is based on each asset’s value and the buyer and seller have adverse tax interests, the allocation “will generally be accepted.”
Adverse interests matter because they keep the split honest. A seller often wants more allocated to land (to reduce their depreciation recapture), while a buyer wants more on the building (for bigger deductions). When both sides push opposite directions and still agree, the IRS trusts the result. The consequence of skipping a written allocation in a business purchase is that the IRS can impose its own under the residual rules.
A common misconception is that any number written into the contract is automatically safe. It is not โ the IRS can override an agreement it finds inappropriate. What you should do: if you are buying a business or commercial property, negotiate the allocation in the contract, and remember that buyer and seller must each report it on Form 8594, the Asset Acquisition Statement.
Method 2 โ Use the County Tax Assessor’s Ratio (Most Common)
This is the workhorse method for everyday rental owners, and the IRS explicitly blesses it. Your county assessor already splits your property’s assessed value into a land figure and an improvement (building) figure on your annual property tax statement. You take that ratio and apply it to your actual purchase price.
Here is the three-step math. First, find the assessed land value and assessed building value on your tax bill. Second, compute the building’s percentage of the total assessed value. Third, multiply your full cost basis by that percentage to get your depreciable building basis; the rest is land.
The consequence of using the assessor ratio carelessly is that assessor land values are sometimes inflated, which shrinks your deduction. A common misconception is that you must use the raw assessed dollar amounts โ you don’t. You use the ratio and apply it to your real cost, because Publication 551 ties the allocation to relative values, not to the assessor’s exact dollars. What you should do: pull the most recent assessment dated near your purchase, screenshot or save it, and keep it as your proof.
Method 3 โ Get a Qualified Appraisal
When real money is on the line, or when the assessor’s split looks unfair, a professional appraisal is the strongest evidence you can have. A licensed appraiser values the land and the building separately using market data, and that report is hard for the IRS to dispute.
Appraisals cost money and take time. A residential appraisal often runs a few hundred dollars and takes one to two weeks; a commercial appraisal can cost thousands and take longer. The consequence of not getting one on a high-value property is that you may rely on a weak split that collapses under audit. A misconception is that the lender’s purchase appraisal already does this โ most lender appraisals value the whole property for loan purposes and do not break out land separately. What you should do: order an appraisal “as of” your purchase date, and ask the appraiser to state land and building values separately in writing.
Method 4 โ Insurance Replacement Cost and Comparable Land Sales
A useful cross-check is to value the building by its insured replacement cost and value the land by recent sales of similar vacant lots nearby. If the two methods land in the same ballpark, your allocation is solid. Courts and the IRS look favorably on allocations supported by more than one independent source.
The consequence of skipping a cross-check on a borderline split is weaker audit defense. A misconception is that replacement cost equals market value โ it usually overstates the building because it ignores depreciation and demolition. What you should do: use replacement cost only as supporting evidence, not as your sole method, and keep the insurance binder and any comparable-sales data.
A Fully Worked Example (Copy This Math)
Suppose you buy a single-family rental for a total cost basis of $400,000 (purchase price plus capitalized closing costs) in tax year 2025. Your county tax statement shows an assessed value of $80,000 for land and $320,000 for the building, for a total assessed value of $400,000.
Step 1 โ Building percentage: $320,000 รท $400,000 = 80%. Step 2 โ Land percentage: $80,000 รท $400,000 = 20%. Step 3 โ Apply to your cost: building basis = $400,000 ร 80% = $320,000; land basis = $400,000 ร 20% = $80,000.
Now the payoff. A residential building depreciates over 27.5 years, so your annual depreciation is $320,000 รท 27.5 = $11,636 per year, per Publication 946. If you were instead in the 24% federal bracket, that deduction saves roughly $2,793 in federal tax each year.
Watch what happens if you sloppily allocate 40% to land instead of 20%. Your building basis drops to $240,000, your yearly depreciation falls to $8,727, and you lose about $2,909 of deduction every year โ roughly $700 in lost tax savings annually, multiplied across nearly three decades. That is why the split matters so much.
Three Common Scenarios
Scenario A โ Buying a turnkey rental with a clean tax bill. Most owners land here, and the assessor ratio handles it cleanly.
| Situation You Face | What It Means for Your Basis |
|---|---|
| Tax bill shows land $80k / building $320k | Apply 80% to your cost for the depreciable building |
| Assessment dated near your purchase | Strong, IRS-accepted evidence under Pub. 551 |
| You depreciate building over 27.5 years | Yearly deduction begins the month you place it in service |
Scenario B โ Converting your former home into a rental. Here a special rule kicks in: your starting basis for depreciation is the lower of your adjusted cost basis or the property’s FMV on the conversion date, as explained in IRS Publication 527.
| Situation You Face | What It Means for Your Basis |
|---|---|
| Home cost $300k, now worth $260k at conversion | Use the lower $260k figure to start depreciation |
| You still must split land vs. building | Apply the assessor ratio to that lower number |
| Home rose in value instead | Use your original cost basis, not the higher FMV |
Scenario C โ Inheriting a property. Inherited property usually gets a “stepped-up” basis equal to its FMV on the date of death, under Internal Revenue Code section 1014.
| Situation You Face | What It Means for Your Basis |
|---|---|
| You inherit a rental worth $500k at death | Basis steps up to $500k FMV |
| You then split that $500k land vs. building | Use an appraisal “as of” the date of death |
| You rent it out | Depreciate the building share over 27.5 years |
Named Examples
Maria buys her first rental. Maria pays $400,000 for a duplex in tax year 2025 and wants the biggest legal deduction. Her tax bill shows 20% land, 80% building, so she assigns $320,000 to the building and depreciates $11,636 a year. Her goal โ maximize cash flow โ is met with a clean, IRS-approved ratio she can prove with one screenshot.
David converts his old house. David lived in a home he bought for $300,000, then turned it into a rental in 2025 when it was worth only $260,000. Because the conversion rule in Publication 527 requires the lower figure, David starts depreciation from $260,000, not $300,000, then applies his 75% building ratio for a $195,000 depreciable basis.
Priya inherits and rents. Priya inherits her father’s rental house, appraised at $500,000 on his date of death. Her basis steps up to $500,000 under section 1014, wiping out decades of his prior depreciation. She gets a date-of-death appraisal splitting it 25% land and 75% building, giving her a fresh $375,000 building basis to depreciate.
How the IRS and Courts Police the Split
The IRS watches land-building allocations because an aggressively low land value inflates depreciation. It can reallocate basis and disallow excess deductions, then charge back taxes plus interest and accuracy penalties. The agency’s authority to reallocate among related items lives in rules like Internal Revenue Code section 482.
The Tax Court has long demanded realistic and supportable methods. In the often-cited case of Alstores Realty Corp. v. Commissioner (46 T.C. 363), the court stressed that allocations must reflect genuine value, not tax-driven wishful thinking. The lesson for you is simple: a split backed by an assessment or appraisal survives; a split pulled from thin air does not.
Mistakes to Avoid
- Not splitting at all and depreciating the whole price. You over-deduct now and face recapture and penalties later.
- Assigning too much to land. You quietly lose thousands in depreciation across the life of the property.
- Assigning almost nothing to land. This invites an IRS reallocation, back taxes, and accuracy penalties.
- Using assessed dollars instead of the assessed ratio. Your basis no longer ties to what you actually paid, and the math breaks.
- Forgetting the lower-of-cost-or-FMV rule on a converted home. You overstate depreciation and must amend, per Publication 527.
- Ignoring the step-up on inherited property. You depreciate from the wrong, lower number and overpay tax for years.
- Throwing away your proof. With no assessment or appraisal on file, you cannot defend the split if audited.
- Skipping depreciation entirely to “play it safe.” The IRS still reduces your basis at sale as if you took it, taxing phantom gain.
Do’s and Don’ts
- Do anchor your split to a document dated near your purchase, because timing-matched evidence is what the IRS trusts.
- Do apply the assessor ratio to your real cost, because that ties depreciation to your actual investment.
- Do keep your proof for the whole holding period plus three years, because the audit window stays open after a sale.
- Do start depreciation the month you place the rental in service, because waiting forfeits deductions you can’t reclaim.
- Do get an appraisal when a lot of money rides on the split, because it is the strongest defense available.
- Don’t assume the contract price is your split, because the contract usually gives one combined number.
- Don’t copy a neighbor’s percentage, because each parcel’s land-building mix differs.
- Don’t push land near zero, because that is the single biggest audit red flag.
- Don’t mix methods inconsistently across your properties, because consistency itself is evidence of good faith.
- Don’t forget to add capitalized closing costs to basis, because leaving them out shrinks your depreciation.
Pros and Cons of the Two Most Popular Methods
| Assessor-Ratio Method | Appraisal Method |
|---|---|
| Pro: free and already in your records | Pro: strongest, hardest-to-challenge evidence |
| Pro: explicitly accepted by Pub. 551 | Pro: ideal for high-value or unusual properties |
| Con: assessor land values can be inflated | Con: costs hundreds to thousands of dollars |
| Con: may understate your depreciation | Con: takes one to several weeks to obtain |
| Con: ratios can lag the real market | Con: must be “as of” the right date to count |
Does My State Follow These Rules?
Start with federal law, because the basis split is fundamentally a federal depreciation question. Most states that have an income tax begin with your federal taxable income, so they accept your federal land-building allocation by default. But conformity is never automatic, and you should confirm your own state.
Some states decouple from federal depreciation rules โ for example, by disallowing bonus depreciation and requiring an addback, which changes the timing of your deductions even though the land-building split itself stays the same. States with no personal income tax, such as Texas, Florida, Nevada, Washington, Wyoming, South Dakota, Alaska, Tennessee, and New Hampshire (which taxes only certain investment income), do not tax rental income at the individual level at all โ so the federal split is all that matters for those owners. What you should do: check your state’s department of revenue page for “depreciation conformity” before you file, because the answer genuinely varies.
What to Do Next
- Gather your documents โ closing statement, purchase contract, and the property tax assessment dated nearest your purchase.
- Pick one method from the four above; for most rentals, use the assessor ratio.
- Run the three-step math and write down your building basis, land basis, and the percentage you used.
- Save your proof โ the assessment, appraisal, or contract โ in your permanent tax file.
- Start depreciation on the building by filing Form 4562 with your return the year you place the property in service.
- Report the split on Form 8594 if you bought a business or commercial property with the seller.
- Call a CPA or tax attorney if the property is high-value, mixed-use, inherited, or part of a business purchase, since those situations carry the most risk.
Expect a DIY split to take an hour with your tax bill in hand; a professional appraisal adds a week or two and a few hundred to a few thousand dollars, but it can pay for itself in defended deductions.
Frequently Asked Questions
Can you depreciate land?
No. Land never wears out, so the tax code allows no depreciation on it. Only the building and certain land improvements like fences or paving can be depreciated, under IRS Publication 946.
What method does the IRS prefer for splitting basis?
Fair market value. For tax year 2025, the IRS first wants you to use each part’s FMV, then allows assessed property-tax values as a fallback if FMV is uncertain, per Publication 551.
Can I use the property tax assessment to allocate basis?
Yes. The IRS explicitly permits using assessed values for real estate tax purposes when you are unsure of FMV. Apply the assessor’s land-building ratio to your actual cost basis.
What happens if I put too much value on the land?
You lose deductions. A high land allocation shrinks your depreciable building basis, cutting your yearly write-off and the tax it saves for the entire 27.5- or 39-year life of the property.
What if I allocate too little to land?
The IRS may reallocate. An unrealistically low land value is a major audit flag. The IRS can recompute your basis, disallow excess depreciation, and add back taxes, interest, and penalties.
How do I split basis on a home I converted to a rental?
Use the lower figure. Your depreciation basis is the lower of your adjusted cost or the property’s FMV on the conversion date, then split that number land versus building, per Publication 527.
What is the basis of inherited property?
Its date-of-death FMV. Inherited property generally gets a stepped-up basis equal to fair market value on the decedent’s date of death, under Internal Revenue Code section 1014.
Do closing costs get added to the building or the land?
Both, by ratio. Capitalized closing costs increase your total cost basis, then they are split between land and building using the same percentage you applied to the purchase price.
How long do I depreciate a rental building?
27.5 years. Residential rental buildings use 27.5 years and commercial buildings use 39 years under the modified accelerated cost recovery system in Publication 946.
Can I change my land-building split later?
Sometimes. Correcting an improper method may require Form 3115, a change in accounting method, rather than just amending. A tax professional should handle this because the rules are technical.
Does demolishing the building change my basis?
Yes. Demolition costs and the building’s remaining basis are added to the land’s basis and cannot be deducted, per the demolition rule in Publication 551.
What if my purchase contract already lists a split?
It usually controls. A contract allocation based on real value, agreed by parties with adverse tax interests, is generally accepted โ but the IRS can override one it finds inappropriate.
Related reading
- Easy Real Estate Depreciation w/47 Examples + FAQs
- How to Do a Cost Segregation Study (w/Examples) + FAQs
- How Much Does a Cost Segregation Study Cost? (w/Examples) + FAQs
- Do I Qualify for a Cost Segregation Study in 2026? (How It Works) + FAQs
- How Does Depreciation Lower Your Rentalโs Cost Basis? (w/Examples) + FAQs
- Whatโs Your Basis in a Property You Built Yourself? (w/Examples) + FAQs
- 570+ Tax Write Offs for Rental Properties (w/ Examples) + FAQs